Specifications

Applied range:
--Imprinter is suitable for coating tin paste and glue on the surface of PCB to fix the electronics components on PCB.
Characteristics
--Adopt special heating panel warming-up mode, featuring equality temperature, high efficiency, saving power and fast warming.
--Special wind wheel design to ensure wind pressure stability.
--Forced independent circle control is used in each temperature area, up and down convection heating mode, featuring accurate and equality oven temperature, large hot capacity.
--Oil pressure lifting is used in up cover of the oven, supported by the safety stick, convenient to clean inside.
--Have temperature out-of-tolerance PCB auto tracking system (board drop test) and ventilator abnormal alarm functions, failure diagnosis and sound-light alarm.
--Fast temperature rising, the temperature from room temperature to operating temperature ≤20 minutes
--Excellent motor with self cool device and high temperature & speed, smooth wind, low vibration and little noise.
--Chain and mesh run synchronously, computer close-loop controls, the accuracy can reach ±1.5%.
--Rail is made of the special aluminum alloy, with high strength and rigidity, little distortion, high accuracy. Rail width can be auto adjusted.
--The central oil storage in automatic oil system is controlled by the computer, oil-filling three to six months , or manual computer control.
--The fresh wind is supplied to each area, ensure the stable wind pressure, large hot capacity and high efficient compensation.
--Unique callbacking rosin management system forces flow direction and stream.
--Rosin chimney drawer design, filter mesh can be removed and to be cleaned freely.
--Powerful program software control system.
--Industry-control machine controlling, Chinese-English Windows XP Pro operating system, with the powerful function.
--Off-electricity protection function, ensure t the PCB normal output not to be damaged after off-electricity.
--PCB on-line counting
--Independent PID control is used in each temperature area respectively, PCB can be tested the temperature on-line, the data curve can be analyzed at any moment, transferred and printed.
--Computer close loop control is used in transmission system, transmission rate, ventilator speed are computer stepless timing.
--Auto monitoring, displaying operation status of equipment.
--Computer setting auto ON/OFF timing

Heating System

Convey System

Control Accuracy

Convey System